Star Micronics SP2000 Uživatelský manuál stáhnout pdf (Strana 56)

Printer Status

Printer Status is the overall status transmitted in the third byte of the auto-

matic status. Printer status is returned as transmission byte count -2 added

by the Header 1. It always updates with new information. (There is no

historical record existing.) Tables 3-5 to 3-9 show the composition of the

overall status. The status of bits described as “Invalid” in the tables are

always “unknown.”

Table 3-5 Printer Status 1 <Printer Status> (Third Byte)

Bit Content Status 0 Status 1

0 Always 0

1 <ETB> Command Not Executed Executed

2 Compulsion SW Status Open Closed

3 Online/Offline Status Online Offline

4 Always 0

5 Invalid

6 Offline using the Online SW Does not occur Occurs

7 Not Used (Fixed at 0)

* Bit 1 is cleared to 0 when returned to the host. (Clearing bit 1 to 0 is not a

target for the automatic status.)

Table 3-6 Printer Status 2 (Error Information) (Fourth Byte)

Bit Content Status 0 Status 1

0 Always 0

1 Invalid

2 Mechanical Error No Error Error Occurred

3 Auto Cutter Error No Error Error Occurred

4 Always 0

5 Reset Not Possible Error No Error Error Occurred

6 Stopped Because of

Hot Print Head

Not Stopped Stopped

7 Not Used (Fixed at 0)

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 80 81

Žádné komentáře

Star Micronics SP2000 Uživatelský manuál Strana 56