Star Micronics SM-S401-DB38 Manuál Strana 12

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 23
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 11
- 11 -
2.4.3. Recharging the battery pack
For recharging the battery pack, install the battery pack in the printer or the battery
holder.
Insert the Battery Charger to the charge connector of the printer or the battery
holder.
Cautions :
1) While charging the printer, turn off the printer power.
2) Do not remove the battery during charging.
3) If the printer is not used for a long time, unplug the power cord from
the printer and outlet.
4) You must use the supplied or optional battery charger.
5) Red Lamp: charging the battery.
Green Lamp: charging is nished.
Notes :
1) The battery is consumable parts and the use hour is gradually de-
creases. (Warranty 6 month)
2) The recharging time depends on the voltage level and ambient temper-
ature of the battery. Normally, if takes about 4 to 5 hours to recharge
a battery pack.
Zobrazit stránku 11
1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 22 23

Komentáře k této Příručce

Žádné komentáře