Star Micronics SM-S401-DB38 Manuál stáhnout pdf (Strana 9)

- 8 -

2.3. Replacing Paper Roll

Cautions :

Be sure to use paper rolls that meet the specications. Do not use paper

rolls that have the paper glued to the core because the printer cannot de-

tect the paper end correctly.

1. Make sure that the printer is not receiving data; otherwise, data may be lost.

2. Open the paper cover using your ngers on both sides of printer, and remove the

remaining paper.

Caution Symbol

This symbol is placed near the thermal head to indicate that it may be hot.

Never touch the thermal head immediately after the printer has been used.

Let the thermal head cool for a few minutes before touching it.

WARNING

1) Do not touch the tear bar.

• Thereisatearbarinsidethepaperoutletslot.Notonlyshouldyounotput

yourhandinthepaperoutletslotwhileprintingisinprogress,neverputyour

handintotheoutletevenwhenprintingisnotinprogress.

• Thepapercovercanbeopenedwhenreplacingthepaper.However,sincethe

tearbarisontheinsideofthepapercover,becarefulnottoplaceyourface

orhandstooclosetothetearbar.

2) Duringandimmediatelyafterprinting,theareaaroundthethermalheadisvery

hot.Donottouchit,asyoucouldbeburned.

Tear Bar

Paper Cover

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Žádné komentáře

Star Micronics SM-S401-DB38 Manuál Strana 9